Resistors
Today we went covered resisters; they are mainly used of creating a resistance in a circuit when some components cannot handle the current of the supply voltage
readings
| Band colours | Measured value | Low tolerance | High tolerance | Pass/fail |
| Red red 22 +-5% | 21.8 | 20.7 | 22.9 | pass |
| Ble gry yelw 684000+-5% | 695000 | 660000 | 729000 | pass |
| Org org bwn 330 +-5% | 327 | 310 | 343 | pass |
| Bwn rd 82 +-5% | 81.1 | 77.0 | 85.1 | pass |
| Grn blu bwn 560 +-5% | 551 | 523 | 578 | pass |
Resistor1. 21.8ohms / resistor2. 695ohms
1 and 2 in series 699ohms
In series the resistance increases with each resistor added to the circuit so total resistance is all the resistors added up.
1 and 2 in parallel 21.8ohms
In parallel the total resistance should be lower than the smallest resistor, the more resistor you put in a circuit the less resistance becomes.
No comments:
Post a Comment